Product Name: Protective Mask (Non-Medical)
Product Grade: FFP2 NR
Filtration: 98%
Standard: EN149:2001 + A1:2009, EHSR compliance of regulation (EU) 2016/425
Notified body number 1437 - CIOP.
The FFP2 mask can be used for 8 hours.
Available documentation:
download
Product description:
The filtering half mask type FFP2 NR is a one-way half mask in which the air flows through the filtering material in the inhalation and the exhalation phase. It is a complete respiratory protective device to protect against solid and liquid aerosols.
The bowl of the filtering half mask consists of the following non-woven fabric layers:
1. The outer layer: the polypropylene sponbound material with the surface mass of 60 g/m2.
2. The middle layer: two layers of the filtering polypropylene material, each with the surface mass of 19 g/m2.
3. The inner layer: the polypropylene spunbound material with the surface mass of 20 g/m2.
The filtering half mask is fitted with: 1. The nose clip made of plastic, reinforced with two wires.
2. Two earloops made of textile rubber.
3. A polypropylene clasp for fastening straps on the back of the head.
4. The nose seal made of the polyethylene foam.
PACKING
Packing method: 10 piece in a foil bag, 50 pieces in a decorative cardboard package
Product Grade: FFP2 NR
Filtration: 98%
Standard: EN149:2001 + A1:2009, EHSR compliance of regulation (EU) 2016/425
Notified body number 1437 - CIOP.
The FFP2 mask can be used for 8 hours.
Available documentation:
download
Product description:
The filtering half mask type FFP2 NR is a one-way half mask in which the air flows through the filtering material in the inhalation and the exhalation phase. It is a complete respiratory protective device to protect against solid and liquid aerosols.
The bowl of the filtering half mask consists of the following non-woven fabric layers:
1. The outer layer: the polypropylene sponbound material with the surface mass of 60 g/m2.
2. The middle layer: two layers of the filtering polypropylene material, each with the surface mass of 19 g/m2.
3. The inner layer: the polypropylene spunbound material with the surface mass of 20 g/m2.
The filtering half mask is fitted with: 1. The nose clip made of plastic, reinforced with two wires.
2. Two earloops made of textile rubber.
3. A polypropylene clasp for fastening straps on the back of the head.
4. The nose seal made of the polyethylene foam.
PACKING
Packing method: 10 piece in a foil bag, 50 pieces in a decorative cardboard package
Make an offer
